Description
GENERAL DESCRIPTION:
The INE300 is a variable load envelope detector that operates from 100Hz to 3.3GHz with a detection range of 40dB, nominally from -25dBm to 15dBm. The recommended load impedance or resistor range is 50ohm to 1MOhm.
The RF input of the INE300 is AC-coupled, allowing the operation of a wide range of frequencies.
The INE300 is designed with bigger surface-mounted technology (SMT) pads to avoid manufacturing yield. The INE300 is housed in a 3.197mm x 3.195mm, 5 leads package. The operation temperature range is -55°C to 150°C.
The INE300 converts high frequency of RFIN to low frequency (kHz range) at the output of the VRMS or Pin 3. This makes the sensing using low sampling rate ADCs and other low-cost circuits possible. Due to this, INE300 is a perfect candidate to be used as low-cost sensor chip.
FEATURES:
- Voltage and Envelope detection
- Input Frequency: 100 Hz to 3.3 GHz
- RF Input Range: -25 dBm to 15 dBm
- Variable Load Impedance / Resistor: 50 W to 1 MW
- Envelope tracking
- AM Demodulation
- Low-Cost Sensor
- Power Consumption: Zero power operation
- Size: 3.197mm x 3.195mm, 5-lead package
TYPICAL APPLICATIONS:
- AM demodulation
- Wireless power amplifier input and output protection
- Wireless receiver input protection
- Radar and Sonar Systems
- Signal Strength Measurement
- automatic gain control (AGC) and dynamic range compression
- Biomedical Signal (electrocardiograms (ECG) or electroencephalograms (EEG) Processing
- Vibration Analysis and Condition Monitoring
- Wireless Power Transfer
- RF energy harvesting
- Ultrasonic and Acoustic Applications
- Ultrasonic flaw detection
- Power Control
- Power Amplifier linearization




